Ezentech India

Technical · 5 min read · 1 September 2026

NABL psychrometric testing,
explained for buyers.

What a psychrometric chamber does, which parameters it measures, what NABL accreditation means and how a procurement team should use the report.

· NABL · Testing · Quality assurance

In one line

A psychrometric test holds indoor and outdoor conditions at set temperature and humidity and measures the cooling capacity, power input, efficiency ratio and airflow an air conditioner actually delivers; NABL accreditation certifies the laboratory's competence to make those measurements.

What a psychrometric chamber does

Two conditioned rooms — one for the indoor unit, one for the outdoor — are held at specified dry-bulb and wet-bulb temperatures. The unit runs at steady state while air flow, temperatures and electrical input are measured.

Parameters measured

  • Cooling capacity, in watts — 3,400 to 6,300 W across the Ezentech sheet.
  • Power input, and from it the efficiency ratio.
  • ISEER, the seasonal efficiency rated under the BEE scheme.
  • Indoor airflow, in m³/h — 850 to 1,100 m³/h on the sheet.
  • The sensible/latent split, with humidity controlled.

What NABL accreditation means

NABL — the National Accreditation Board for Testing and Calibration Laboratories — accredits a laboratory's competence to perform specific tests, with audits of method, equipment calibration and personnel. An accredited in-house laboratory means the manufacturer's own sheet figures are produced under that audited method.

How a buyer uses the report

  • Compare rated capacity and ISEER on the sheet with the label the brand intends to carry.
  • Ask for the test conditions and the accreditation scope alongside the figures.
  • Use the airflow figure to sanity-check the fascia and grille design.

Questions

03 questions

Does Ezentech have its own psychrometric laboratory?

Yes — an NABL-accredited psychrometric laboratory that every unit passes through before dispatch.

Is a third-party test report equivalent?

A third-party accredited report is valid for the sample tested. An accredited in-house lab lets the manufacturer test production units continuously rather than one sample.

Which figures on the sheet come from the psychrometric test?

Cooling capacity, rated ISEER and indoor airflow.

Start the conversation

Let’s build
your next range.

From spec to shipped — send us your requirement and get a structured, engineering-backed quote.

OEM / ODM · Private label · Contract manufacturing