Services & capabilities
One roof.
Every capability.
Four plants, one-million-unit annual capacity and 20+ years of building air conditioners for other people's brands — with the coil, chassis, fascia and copper line made on our own lines. This is the map.
The offer
A manufacturer,
not an assembler.
Ezentech builds the finished unit and the components inside it. That backward integration is the difference between a supplier that sources parts and one that controls them.
- Manufacturing plants
- 04
- Units of annual capacity
- 1M+
- OEM / ODM manufacturing
- 20+ yrs
- Accredited psychrometric lab
- NABL
Four ways to work with us
04 models
- OEM — build to print
- You own the design; Ezentech manufactures it on its lines with its in-house components and tests it in its lab.
- Compare the models
- ODM — design to production
- Start from an Ezentech platform; product development adapts it to your brief and your industrial design.
- Compare the models
- Private label
- Your badge on a released Ezentech platform — the fastest route to a range on the shelf.
- Compare the models
- Contract manufacturing
- Flexible-volume production to close a capacity gap in your own programme.
- Compare the models
Capability map
What is made in-house,
and where it goes.
Six capabilities, the units each one feeds, and the sheet-verified fact behind it.
Capability matrix
06 capabilities
| Row | Where | Goes into | From the sheet | Page |
|---|---|---|---|---|
| Heat Exchanger CoilsIn-house component | In-house | 2-row slit-fin evaporator, 7 mm tube · 1/2-row condenser, 5 mm tube | Open | |
| Sheet Metal FabricationIn-house component | In-house | 3 outdoor cabinet sizes · 830 / 930 / 1100 mm indoor platforms | Open | |
| Plastic Injection MouldingIn-house component | In-house | Fascias, louvres, grilles for 3 split chassis and the window front | Open | |
| Copper Tubing & ToolingIn-house component | In-house | 7 / 5 mm coil tube · 6.35 mm liquid, 9.52–15.88 mm gas · tool room | Open | |
| R&D & Product DevelopmentCapability | In-house | One chassis, several capacities · coil-fan-expansion tuned to ISEER | Open | |
| Testing & Quality AssuranceCapability | In-house | NABL psychrometric lab · ISO 9001 / 14001 · BIS | Open |
Heat Exchanger CoilsIn-house component
- Where
- In-house
- From the sheet
- 2-row slit-fin evaporator, 7 mm tube · 1/2-row condenser, 5 mm tube
- Page
- Open
Sheet Metal FabricationIn-house component
- Where
- In-house
- From the sheet
- 3 outdoor cabinet sizes · 830 / 930 / 1100 mm indoor platforms
- Page
- Open
Plastic Injection MouldingIn-house component
- Where
- In-house
- From the sheet
- Fascias, louvres, grilles for 3 split chassis and the window front
- Page
- Open
Copper Tubing & ToolingIn-house component
- Where
- In-house
- From the sheet
- 7 / 5 mm coil tube · 6.35 mm liquid, 9.52–15.88 mm gas · tool room
- Page
- Open
R&D & Product DevelopmentCapability
- Where
- In-house
- From the sheet
- One chassis, several capacities · coil-fan-expansion tuned to ISEER
- Page
- Open
Testing & Quality AssuranceCapability
- Where
- In-house
- From the sheet
- NABL psychrometric lab · ISO 9001 / 14001 · BIS
- Page
- Open
Every capability
Seven pages,
one supply chain.
Each capability has its own page with the process, the sheet-verified facts and the questions buyers ask.
Every capability
07 pages
- OEM, ODM, Private Label & Contract ManufacturingBuild-to-print OEM, design-to-production ODM, private label and flexible-volume contract manufacturing — same plants, same lab, same in-house components.Service
- Heat Exchanger CoilsEvaporator and condenser coils built in-house — two-row slit-fin evaporators on 7 mm tube, one- and two-row condensers on 5 mm tube.In-house
- Sheet Metal FabricationOutdoor cabinets in three sizes, indoor chassis plates, base pans and installation hardware — pressed and formed on Ezentech's own lines.In-house
- Plastic Injection MouldingFascias, louvres, grilles and structural plastic parts for the 830, 930 and 1100 mm chassis and the window cabinet — tooled and moulded in-house.In-house
- Copper Tubing & ToolingInner-grooved coil tube, refrigerant line sets from 6.35 mm liquid to 15.88 mm gas, and an in-house tool and die room — all under one roof.In-house
- R&D & Product DevelopmentPlatform architecture, thermal design, industrial design, prototyping and lab validation — from a partner's brief to a production platform.Capability
- Testing & Quality AssuranceAn NABL-accredited psychrometric laboratory measures cooling capacity, power input and ISEER; ISO 9001, ISO 14001 and BIS complete the quality file.Capability
Recognition
Recognised by the brands we build for
LG “Role Model Supplier” — earned on the line, not the letterhead.
Not sure which engagement model fits? Send the brief as it stands — capacity, market, volume — and we will propose the route.
Start the conversation
Let’s build
your next range.
From spec to shipped — send us your requirement and get a structured, engineering-backed quote.
OEM / ODM · Private label · Contract manufacturing